|
     
Laser
Innovations services all models of small frame Coherent ion lasers.
Our years of experience and technical expertise combine to insure
that we will keep your system running at a fraction of the cost that
you would expect.
|
Innova
60 - Small Frame Ion Laser
|
Laser
Systems Serviced
-
Coherent Innova 60-1 Argon Ion Laser
System
-
Coherent Innova 60-2 Argon Ion Laser
System
|
[Return
to Top]
|
Innova
60 - Small Frame Ion Laser
|
Laser
Systems Available for Purchase
Coherent Innova 60-1 Argon Ion Laser System
-
1.0 Watt, 1 year / 2000 hour warranty on Innova Plasma
Tube
Coherent Innova 60-2 Argon Ion Laser System
-
2.0 Watt, 1 year / 2000 hour warranty on Innova Plasma
Tube
[Return
to Top]
|
Innova
60 - Small Frame Ion Laser
|
General
Data
[Return
to Top]
|
Height
|
22.9
cm
9.00 in
|
|
Width
|
46.4
cm
18.25 in
|
|
Length
|
37.4
cm
14.72 in
|
|
Weight
|
34.1
Kg
75 lbs
|
|
|
Height
|
18.8
cm +/- 0.5 cm
7.40 in +/- 0.21 in
|
|
Width
|
18.6
cm
7.31 in
|
|
Length
|
86.6
cm
34.19 in
|
|
Weight
|
34.1
Kg
75 lbs
|
|
[Return
to Top]
|
Innova
60 - Small Frame Ion Laser
|
Specifications
|
System
Parameter Specifications
|
|
Bore
configuration
|
Tungsten
disk with one piece ceramic
envelope
|
|
Plasma
Tube Cooling
|
Conductively
water cooled
|
|
Resonator
Construction
|
Anodized
aluminum
|
|
Cavity
specification
|
Flat
high reflector, long radius
output coupler
|
|
Output
Polarization
|
100:1
Electric Vector Vertical
|
|
Cavity
length:
Multiline
Single-line
|
859
mm
887 mm
|
|
Excitation
|
Current
regulated DC
|
|
Input
voltage
|
190-260
VAC 50 or 60 Hz, 3 Phase w/GND
|
|
Maximum
input current
|
35
Amps per phase
|
|
Maximum
Tube Discharge Current:
|
35
Amps
|
|
Water
flow rate
|
7.3
liters/min
1.9 gal/min
|
|
Water
incoming temperature:
minimum
maximum
|
10oC (50oF)
35oC (95oF)
|
|
Water
pressure:
minimum
maximum
|
1.41 kg/cm2 (20 psi)
4.23 kg/cm2 (60 psi)
|
Specifications
are for reference only and do not constitute warranty specifications
on serviced lasers by Laser Innovations.
[Return
to Top]
|
Performance
Parameter Specifications
|
|
Beam
diameter(1)
|
1.5
mm
|
|
Beam divergence (half angle)(1)
|
0.5
mrad
|
|
Long-term
power stability(2):
Current Regulation
Light Regulation
|
+/- 3%
+/- 0.5%
|
|
Optical
noise(3):
Current Regulation
Light Regulation
|
+/- 0.5% RMS
+/- 0.5% RMS
|
(1)
Measured 514.5 nm at output coupler.
(2) Max. peak variation over any 30-min. period
after a 2-hr warm-up.
(3) Measured with a wide band photodiode driving
a resistive load.
Specifications
are for reference only and do not constitute warranty specifications
on serviced lasers by Laser Innovations.
[Return
to Top]
|
Output
Power (TEMoo) Specifications
|
|
Wavelength
nm Power(1) mW
|
Coherent
Innova 60-1
|
Coherent
Innova 60-S
|
|
Multiline
(VIS)
|
1
Watt
|
2
Watts
|
|
528.7(2)
|
60
|
80
|
|
514.5
|
400
|
700
|
|
501.7(2)
|
50
|
100
|
|
496.5(2)
|
100
|
250
|
|
488.0
|
350
|
600
|
|
476.5(2)
|
100
|
250
|
|
472.7(2)
|
|
50
|
|
465.8(2)
|
|
40
|
|
457.9(2)
|
50
|
125
|
(1)
Single line powers for argon lasers are specified at 514.5 and 488.0
nm only. Other powers indicated are nominal and may require
special optics. Standard optic range: 514.5 nm - 457.9
nm.
(2) Standard option: Special optics and
testing are required.
Specifications
are for reference only and do not constitute warranty specifications
on serviced lasers by Laser Innovations.
[Return
to Top]
Technical Questions Pertaining to Innova
Small Frame Lasers
Please send all technical questions to the following E-mail
address:
information@coherentlaser.com
[Return
to Top]
Laser Innovations
1150 E. Main Street Santa Paula
CA 93060
Tel (805) 933-0015
Fax (805) 933-0042
E-mail: information@coherentlaser.com
|
